1 Introduction

The Sandberg USB to Sound Link (referred to as “the adapter”) is a compact external USB sound card with connectors for both speakers and microphone. It allows you, for example, to connect an ordinary headset to your computer via a USB port without you having to disconnect any sound equipment already connected to the computer.

System requirements:

• Pentium PC or compatible
  
• 1 available USB port

2 Installing the adapter

1. Start Windows.
   
2. Connect the adapter to your computer’s USB port.
   
3. Windows will install the drivers for the adapter automatically.

The adapter is now installed and ready for use.

3 Connecting speakers or headphones and a microphone

Connect your speakers or headphones to the green port on the adapter.

Connect your microphone to the red port on the adapter.

4 Troubleshooting

If there is no sound from the speakers or headphones, and the adapter has otherwise been installed without any problems, check the following:

• Whether the speakers or headphones are correctly connected (see section 3).
  
• Whether the speaker output is turned up under the “Volume” icon in the notifi cation area or in the “Control Panel”.
  
• If the above does not help, test the speakers or headphones on another sound source.

If the microphone does not work, check the following:

• That the microphone is correctly connected and is on (see section 3).
  
• That the microphone is enabled under the sound settings in “Control Panel”.

Have fun with your Sandberg USB to Sound Link.